Call us on +44 (0) 1709 570212
Language
Language
Material X6CrNiNb18 10 is an austenitic stainless steel that offers an excellent corrosion resistance to acid, alkali and salt solutions as well as offering both good welding and antioxidant properties.
| Element | Min | Max |
|---|---|---|
| C (Carbon) | 0.08% | |
| Cr (Chromium) | 17% | 19% |
| Mn (Manganese) | 2% | |
| N (Nitrogen) | 0.1% | |
| Ni (Nickel) | 9% | 12% |
| P (Phosphorus) | 0.045% | |
| S (Sulphur) | 0.03% | |
| Si (Silicon) | 1% |
| Mechanical Properties | Min | Max |
|---|---|---|
| Ultimate Tensile Strength (UTS) | 520 MPa | 720 MPa |
| 0.2% Proof Stress | 220 MPa | |
| Elongation | 40% | |
| Gauge length | A80mm |
Applications
Used commonly within the Oil and Gas, Petrochemical industries.
Typically used within applications such as heat exchangers, Piping, Boiler tubes, etc.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.
