Call us on +44 (0) 1709 570212
Language
Language
310S25 is an austenitic stainless chromium Nickel steel that’s suitable for high-temperature applications offering a maximum service temperature of up to 1149°C. This materials also offers both a good strength and weldability.
Base Element Fe (Iron)
| Element | Min | Max |
|---|---|---|
| C (Carbon) | 0.08% | |
| Cr (Chromium) | 24% | 26% |
| Mn (Manganese) | 2% | |
| Ni (Nickel) | 19% | 22% |
| P (Phosphorus) | 0.045% | |
| S (Sulphur) | 0.03% | |
| Si (Silicon) | 1.5% |
| Mechanical Properties | Min | Max |
|---|---|---|
| Ultimate Tensile Strength (UTS) | 539 | 735 MPa |
| Yield Strength | 196 MPa | |
| Elongation | 30% | |
| Gauge Length | A5D |
Applications
Commonly used within the Engineering, Automotive, Iron, Steel and non-ferrous industries.Typical applications include heat exchangers, radiant, furnace and muffle tubes, burners etc.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright and may be freely distributed but not reproduced without permission.
